Microsoft Security Bulletin MS10-007 - Critical


Even though it was a stand-alone application and was not available in any Office XP bundle, it was a part of the Office XP suite. Specifies to run the task only when the "run as" user the user account under which the task runs is logged on to the computer. Retrieved 22 February

schtasks create


You may also be able to verify the files that this security update has installed by reviewing the registry keys listed in the Reference Table in this section. These registry keys may not contain a complete list of installed files. Also, these registry keys may not be created correctly when an administrator or an OEM integrates or slipstreams this security update into the Windows installation source files. Note For supported versions of Windows XP Professional x64 Edition, this security update is the same as supported versions of the Windows Server x64 Edition security update.

When you install this security update, the installer checks to see if one or more of the files that are being updated on your system have previously been updated by a Microsoft hotfix. For backward compatibility, the security update also supports many of the setup switches that the earlier version of the Setup program uses. See the section, Detection and Deployment Tools and Guidance, earlier in this bulletin for more information.

Microsoft thanks the following for working with us to help protect customers:. To improve security protections for customers, Microsoft provides vulnerability information to major security software providers in advance of each monthly security update release. Security software providers can then use this vulnerability information to provide updated protections to customers via their security software or devices, such as antivirus, network-based intrusion detection systems, or host-based intrusion prevention systems.

To determine whether active protections are available from security software providers, please visit the active protections Web sites provided by program partners, listed in Microsoft Active Protections Program MAPP Partners. The information provided in the Microsoft Knowledge Base is provided "as is" without warranty of any kind.

Microsoft disclaims all warranties, either express or implied, including the warranties of merchantability and fitness for a particular purpose. In no event shall Microsoft Corporation or its suppliers be liable for any damages whatsoever including direct, indirect, incidental, consequential, loss of business profits or special damages, even if Microsoft Corporation or its suppliers have been advised of the possibility of such damages.

Some states do not allow the exclusion or limitation of liability for consequential or incidental damages so the foregoing limitation may not apply. February 09, Version: None Affected and Non-Affected Software The following software have been tested to determine which versions or editions are affected.

Consult the following table to determine which updates apply to your environment. Operating System Internet Explorer 5. Vulnerability Information Severity Ratings and Vulnerability Identifiers The following severity ratings assume the potential maximum impact of the vulnerability. Mitigating Factors for URL Validation Vulnerability - CVE Mitigation refers to a setting, common configuration, or general best-practice, existing in a default state, that could reduce the severity of exploitation of a vulnerability.

The following mitigating factors may be helpful in your situation: Update Information Detection and Deployment Tools and Guidance Manage the software and security updates you need to deploy to the servers, desktop, and mobile systems in your organization. Detection and Deployment Guidance Microsoft provides detection and deployment guidance for security updates.

Microsoft Baseline Security Analyzer Microsoft Baseline Security Analyzer MBSA allows administrators to scan local and remote systems for missing security updates as well as common security misconfigurations. The following table provides the MBSA detection summary for this security update.

Systems Management Server The following table provides the SMS detection and deployment summary for this security update. Update Compatibility Evaluator and Application Compatibility Toolkit Updates often write to the same files and registry settings required for your applications to run.

Security Update Deployment Affected Software For information about the specific security update for your affected software, click the appropriate link: Windows all editions Reference Table The following table contains the security update information for this software. Yes, you must restart your system after you apply this security update.

This security update supports the following setup switches. No user interaction is required, but installation status is displayed. If a restart is required at the end of Setup, a dialog box will be presented to the user with a timer warning that the computer will restart in 30 seconds.

This is the same as unattended mode, but no status or error messages are displayed. The default setting is 30 seconds. This log details the files that are copied. Using this switch may cause the installation to proceed more slowly. Removing the Update This security update supports the following setup switches. File Version Verification Because there are several editions of Microsoft Windows, the following steps may be different on your system. Click Start , and then click Search.

In the All or part of the file name box, type a file name from the appropriate file information table, and then click Search.

In the list of files, right-click a file name from the appropriate file information table, and then click Properties. Note Depending on the edition of the operating system, or the programs that are installed on your system, some of the files that are listed in the file information table may not be installed. On the Version tab, determine the version of the file that is installed on your system by comparing it to the version that is documented in the appropriate file information table.

Note Attributes other than the file version may change during installation. Comparing other file attributes to the information in the file information table is not a supported method of verifying that the update has been applied. Also, in certain cases, files may be renamed during installation. If the file or version information is not present, use one of the other available methods to verify update installation.

Registry Key Verification You may also be able to verify the files that this security update has installed by reviewing the registry keys listed in the Reference Table in this section. Windows XP all editions Reference Table The following table contains the security update information for this software. Deployment Information Installing the Update When you install this security update, the installer checks whether one or more of the files that are being updated on your system have previously been updated by a Microsoft hotfix.

These files are located at the path that is specified in the switch. Windows Server all editions Reference Table The following table contains the security update information for this software. Inclusion in Future Service Packs The update for this issue will be included in a future service pack or update rollup Deployment Installing without user intervention For all supported bit editions of Windows Server HotPatching This security update does not support HotPatching.

Other Information Acknowledgments Microsoft thanks the following for working with us to help protect customers: Support Customers in the U. There is no charge for support calls that are associated with security updates. For more information about available support options, see Microsoft Help and Support. Specifies the date on which the task schedule starts. The default value is the current date on the local computer.

Only one format is valid for each locale. The valid date formats are listed in the following table. Use the format most similar to the format selected for Short date in Regional and Language Options in Control Panel on the local computer. Specifies the date on which the schedule ends. This parameter is optional. By default, schedules have no ending date.

Specifies to run the task only when the "run as" user the user account under which the task runs is logged on to the computer. This parameter has no effect on tasks that run with system permissions. The following command schedules a security script, Sec. Because the command does not include a starting date or time, the task starts 20 minutes after the command completes, and runs every 20 minutes thereafter whenever the system is running.

Notice that the security script source file is located on a remote computer, but that the task is scheduled and executes on the local computer. The following command schedules the MyApp program to run every five hours beginning on the first day of March Because the command does not specify a start time, the current time is used as the start time.

The following command schedules the MyApp program to run hourly beginning at five minutes past midnight. If this command runs after In this example, the task runs at Because the duration is 10 hours, the task is not run again at Instead, it starts again at The following example schedules the MyApp program to run once a day, every day, at 8: The following example schedules the MyApp program to run every twelve days at 1: Because the task will run with the permissions of my user account, then the task will run only when I am logged on.

The default is MON Monday. The every day option is equivalent to scheduling a daily task. The following command schedules the MyApp program to run on a remote computer every six weeks. Also, because the command is run remotely, all paths in the command, including the path to MyApp. The following command schedules a task to run every other Friday. The default is 1 the first day of the month. The following command schedules the MyApp program to run on the first day of every month.

The following command schedules the MyApp program to run every three months. The following command schedules the MyApp program to run every other month on the 21st day of the month at midnight.

The command specifies that this task should run for one year, from July 2, to June 30, The "day of the week" schedule is a variation of the weekly schedule. The following command schedules the MyApp program to run every week on Wednesday. The following command schedules a task to run on Monday and Friday of every eighth week.

You can specify only one day of the week for this schedule type. The following command schedules the MyApp program to run on the second Sunday of every month. You can specify only one day in the schedule. To schedule a task for the last day of the month, use the last day schedule type. Because the default modifier is none no modifier , the default day is day 1, and the default month is every month, the command does not need any additional parameters.

The following command schedules the MyApp program to run on May 15 and June 15 at 3: The following command schedules the MyApp program to run on the last day of every month. The following command schedules the MyApp program to run on the last day of February and the last day of March at 6: Schtasks does not permit you to schedule a task to run once if the date and time specified are in the past, based on the time of the local computer.

To schedule a task that runs once on a remote computer in a different time zone, you must schedule it before that date and time occurs on the local computer. The following command schedules the MyApp program to run at midnight on January 1, The following command schedules the MyApp program to run every time the system starts, beginning on March 15, The "on logon" schedule type schedules a task that runs whenever any user logs on to the computer.

The following command schedules a batch file to run every time a user any user logs on to the remote computer. Because the command is remote, all paths in the command, including the path to the batch file, refer to a path on the remote computer. The following command schedules the MyApp program to run whenever the computer is idle. Schtasks does not have a "run now" option, but you can simulate that option by creating a task that runs once and starts in a few minutes. The following command schedules a task to run once, on November 13, at 2: You can schedule tasks of all types to run with permissions of an alternate account on both the local and a remote computer.

The following command schedules the MyApp program to run on the local computer. In this example, the task is scheduled to run every Tuesday, but you can use any schedule type for a task run with alternate permissions.

The following command schedules the MyApp program to run on the Marketing computer every four days. After authenticating the passwords, schtasks displays a message indicating that the task is scheduled. The following command schedules the AdminCheck. Tasks of all types can run with permissions of the System account on both the local and a remote computer.

The following command schedules the MyApp program to run on the local computer with permissions of the System account. In this example, the task is scheduled to run on the fifteenth day of every month, but you can use any schedule type for a task run with system permissions. It does not prompt for a password. The following command schedules the MyApp program to run on the Finance01 computer every morning at 4: Each task runs only one program.

However, you can create a batch file that runs multiple programs and then schedule a task to run the batch file. The following procedure demonstrates this method:. In this example, you create a batch file that starts Event Viewer Eventvwr. The following command creates the Monitor task, which runs whenever anyone logs on. As a result of this command, whenever a user logs on to the computer, the task starts both Event Viewer and System Monitor.

To schedule a task to run on a remote computer, you must add the task to the remote computer's schedule. Tasks of all types can be scheduled on a remote computer, but the following conditions must be met. The following command schedules the MyApp program to run on the SRV01 remote computer every ten days starting immediately. Then the feature phone business was sold to HMD global , which continues to produce both feature phones and Android smartphones under license from Nokia.

From Wikipedia, the free encyclopedia. Retrieved April 4, United States Securities and Exchange Commission. Retrieved August 23, Retrieved from " https: Views Read Change Change source View history. In other projects Wikimedia Commons. This page was last changed on 4 January , at See Terms of Use for details.

Computer software Online services Video games.